Brother HL-1240 - Manual (Page 48)

2-6
Table 1: Serial Interface Parameters Settings
Selector Parameters On (up) Off (down)
1 Baud Rate See Table 2
2 Baud Rate See Table 2
3 Data Length 7 bits 8 bits
4 Stop Bit 2 bits 1 bit
5 Parity See Table 3.
6 Parity See Table 3.
7 Protocol Xon/Xoff + DTR DTR only
8 Robust Xon On Off
Table 2: Baud Rate Settings
Selector 1 Selector 2 For RS-422A For RS-232C
Off Off 57600 9600
On Off 9600 4800
Off On 1200 1200
On On 19200 19200
Table 3: Parity Settings
Selector 5 Selector 6 Parity
On On Odd
On Off Even
Off Off None
✒ Note
•
The factory settings are indicated in bold ( all switches OFF ).
•
If the robust Xon setting is turned on with selector 8, the printer sends Xon
signals at one second intervals to the connected computer until it receives data. It
is effective only if selector 7 is set to the On position for the Xon/Xoff plus DTR
setting.