Brother PT-H500 - Manual (Page 33)

33

G
E
TTI
N
G
STA
R
TED
Setting Language and Unit
Language
Press the Menu key, select " Language" using the or key, and then press the
OK or Enter key.
Select a language for menu commands and messages shown on the LCD display by
using the or key.
The language can be selected from "Čeština", "Dansk", "Deutsch", "English",
"Español", "Français", "Hrvatski", "Italiano", "Magyar", "Nederlands", "Norsk", "Polski",
"Português", "Português (Brasil)", "Română", "Slovenski", "Slovenský", "Suomi",
"Svenska" or "Türkçe".
Press the OK or Enter key.
Unit
Press the Menu key, select "Unit" using the or key, and then press the OK or
Enter key.
Select a unit for dimensions shown on the LCD display by using the or key.
Either "inch" or "mm" can be selected.
Press the OK or Enter key.
This P-touch labeler is equipped with a USB port, allowing you to connect it to a computer.
You will need to install P-touch Editor and printer driver to use your P-touch labeler with your
computer. When you use Windows
®
, install P-touch Editor, the printer driver and P-touch
Update Software from the enclosed CD-ROM.
When you use Macintosh, you can download the driver, software and manuals by visiting
the Brother Solutions Center at http://solutions.brother.com/.
Setting Language and Unit
1
2
3
Press the Esc key to return to the previous step.
1
2
3
The default setting is "inch".
Press the Esc key to return to the previous step.
Using P-touch Software