Brother PT-H500 - Manual (Page 17)

17

IN
T
R
ODU
C
T
ION
Symbols Used in this Guide
• DO NOT attempt to cut the tape while printing or feeding since this will damage the tape.
• Depending on the location, material, and environmental conditions, the label may unpeel
or become irremovable, and the color of the label may change or be transferred to other
objects.
• DO NOT expose the tape cassettes to direct sunlight, high temperatures, high humidity,
or dust. Store tape cassettes in a cool, dark place. Use the tape cassettes soon after
opening the tape cassette package.
• Markings made with oil-based or water-based ink may be visible through a label affixed
over them. To hide the markings, use two labels layered on top of each other or use a
dark-colored label.
• Any data stored in memory will be lost due to failure or repair of the P-touch labeler, or if
the battery expires.
• When power is disconnected for more than two minutes, all text and format settings will
be cleared. Any text files stored in the memory will also be cleared.
• A protective clear plastic sticker is placed over the display during manufacturing and
shipping. This sticker should be removed prior to use.
• You can also use Heat Shrink Tube in this model. Please check our website for further
information. You cannot print frames, label collections, block layouts, templates pre-set in
the P-touch labeler, and some font settings when using Heat Shrink Tube. The printed
characters may be smaller than when using TZe tape.
• The P-touch is not equipped with a charging feature for Ni-MH rechargeable batteries.
• The printed label may differ from the image that appears on the LCD.
• Note that Brother Industries, Ltd. does not assume responsibility for any damage or injury
arising from the failure to follow the precautions listed in this manual.
• We strongly recommend that you read this User’s Guide carefully before using your
P-touch labeler, and then keep it nearby for future reference.
CD-ROM
• DO NOT scratch the CD-ROM, expose it to extremely high or low temperatures, place
heavy objects on top of it, or bend it.
• The software on the CD-ROM is intended for use with the P-touch labeler and may be
installed on more than one computer.
The following symbols are used throughout this guide to indicate additional information.
Symbols Used in this Guide
:
This symbol indicates information or directions that may result in damage or injury
if ignored, or operations that will result in errors.
:
This symbol indicates information or directions that may help you understand and
use the P-touch
labeler more efficiently.