Brother HL 4570CDWT - Manual (Page 27)

Configuring your machine for a wireless network (For HL-4570CDW(T))
22
3
j
Choose the Authentication method using + or -, and press OK.
Do one of the following:
If you chose LEAP, go to step p.
If you chose EAP-FAST, go to step k.
If you chose PEAP, go to step k.
If you chose EAP-TTLS, go to step k.
If you chose EAP-TLS, go to step l.
k Choose the Inner Authentication method NONE, CHAP, MS-CHAP, MS-CHAPv2, GTC or PAP using + or -,
and press OK.
Go to step l.
Note
Depending on your Authentication method, the Inner Authentication method selections differ.
l Choose encryption type TKIP or AES using + or -, and press OK.
Do one of the following:
If your Authentication method is EAP-TLS, go to step m.
For other Authentication methods, go to step n.
m
The machine will display a list of available Client Certificates. Choose the certificate and go to step n.
n
Choose the verification method No Verification, CA or CA + Server ID using + or -, and press
OK.
Do one of the following:
If you chose CA + Server ID, go to step o.
For other selections, go to step p.
Note
If you have not imported a CA certificate in your machine, the machine will display No Verification.
To import a CA certificate, see Using Certificates for device security on page 60.
o Enter the server ID. (For information how to type text, see the Quick Setup Guide.) Go to step p.