Brother DCP-120C - Manual (Page 95)

TROUBLESHOOTING AND ROUTINE MAINTENANCE 6 - 23
4
Remove the protective yellow caps.
5
Each color has its own correct position. Keep the ink cartridge
in an upright position when you insert it into slot. Press down
firmly on the ink cartridge until the hook snaps over it.
6
Lift the scanner cover to release the lock. Gently push the
scanner cover support down and close the scanner cover.
7
If you replaced an ink cartridge while Near Empty was
displayed on the LCD, the LCD may ask you to verify that it was
a brand new one. Example: Did You Change Blck?
▲ Yes
▼ No . For each new cartridge you installed, press (Yes) to
automatically reset the ink dot counter for that color. If the ink
cartridge you installed is not a brand new one, please be sure to
select
(No).
Do not touch the area shown in the illustration above.
If the protective yellow cap comes off when you open the bag
the cartridge will not be damaged.
If you wait until Ink Empty message is displayed on the LCD,
the machine will automatically reset the ink dot counter.
DO NOT TOUCH
Protective Yellow Cap
New Ink Cartridge
Ink Cartridge Hook