Canceling a broadcast in progress, Real time transmission – Brother MFC-J435W User Manual
Page 16
Chapter 3
12
Note
• If you did not use up any of the numbers
for Groups, you can broadcast faxes to as
many as 90 different numbers.
• The machine’s available memory will vary
depending on the types of jobs in the
memory and the number of locations used
for broadcasting. If you broadcast to the
maximum number available, you will not
be able to use dual access.
• If the Out of Memory message
appears, press Stop/Exit to stop the job.
If more than one page has been scanned,
press Black Start to send the portion that
is in the machine’s memory.
Canceling a broadcast in progress
3
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Remaining Jobs.
Press OK.
The LCD will show the fax number being
dialed and the Broadcasting job
number.
d
Press OK.
The LCD will ask you the following
question:
Cancel Job?
Yes
i
Press 1
No
i
Press 2
e
Press 1 to cancel the fax number being
dialed.
The LCD will then show the
Broadcasting job number.
f
Press OK.
The LCD will ask you the following
question:
Cancel Job?
Yes
i
Press 1
No
i
Press 2
g
To cancel the broadcast, press 1.
h
Press Stop/Exit.
Real Time Transmission
3
When you are sending a fax, the machine will
scan the document into the memory before
sending it. Then, as soon as the telephone
line is free, the machine will start dialing and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can do
this by turning on Real Time TX.
a
Press (FAX).
b
Load your document.
c
Press a or b to choose
Advanced Settings.
Press OK.
d
Press a or b to choose Real Time TX.
Press OK.
e
Press a or b to choose On (or Off).
Press OK.
f
Press Clear so you can continue
sending your fax.
Note
• If you are sending a color fax or if the
memory is full and you are sending a black
& white fax from the ADF, the machine will
send the document in real time (even if
Real Time TX is set to Off).
• In Real Time Transmission, the automatic
redial feature does not work when you are
using the scanner glass.