Asante Technologies VR2004 Series - Manual (Page 5)

User’s Manual
5
4. Once the information has been recorded, select Configure:
Using DHCP. You will receive an IP address automatically
from your DHCP server.
The TCP/IP configuration of your computer is now complete. Re-
peat steps 1, 2 and 4 to configure additional Macs that you wish to
add to the router.
Windows 98/Me
1.
From the Windows Start button, choose Run. In the dialog box,
type winipcfg and click OK.
2. Choose your computer’s Ethernet adapter from the first drop-
down list.
Tip: The PPP setting is usually for your dial-up analog modem.
Don’t choose this selection.
Item No. TCP/IP Control Panel Description Your Setting
1 Configure Manually or
Using DHCP Server
Static IP Address or
Dynamic IP Address
2 IP Address WAN IP Address
3 Subnet Mask WAN Subnet Mask
4 Router Address WAN Gateway
5 Name Server Address Primary and Secon-
dary DNS
6 Host Name (DHCP
Server Only)
Client ID No.