ADC 70 - Manual (Page 3)

ADCP-80-524 • Issue 1 • November 2001
Page 3
© 2001, ADC Telecommunications, Inc.
INTRODUCTION
This
manual describes the PowerWorx ® Type 70 Series Power Distribution Panels and provides
installation,
test, operation, and maintenance procedures. Two types of PowerWorx Type 70
power
distribution fuse panels are available: the traditional power distribution fuse panel and
the
uninterrupted power distribution fuse panel. Within this manual, the fuse panels are
referred
to as the “traditional fuse panel” and “uninterrupted fuse panel.”
Revision History
Trademark Information
ADC
and PowerWorx are registered trademarks of ADC Telecommunications, Inc.
Standards
Type
70 series fuse panels are compliant with all major standards including UL, NEC 1999, and
CSA
standards. The fuse panel design places great emphasis on high reliability and simplicity
of
operation.
Admonishments
Important
safety admonishments are used throughout this manual to warn of possible hazards to
persons
or equipment. An admonishment identifies a possible hazard and then explains what
may
happen if the hazard is not avoided. The admonishments — in the form of Dangers,
Warnings,
and Cautions — must be followed at all times. These warnings are flagged by use of
the
triangular alert icon (seen below), and are listed in descending order of severity of injury or
damage
and likelihood of occurrence.
ISSUE DATE REASON FOR CHANGE
Issue 1 11/2001 Original
Danger:
Danger is used to indicate the presence of a hazard that will cause severe personal
injury,
death, or substantial property damage if the hazard is not avoided.
Warning:
Warning is used to indicate the presence of a hazard that can cause severe personal
injury,
death, or substantial property damage if the hazard is not avoided.
Caution:
Caution is used to indicate the presence of a hazard that will or can cause minor
personal
injury or property damage if the hazard is not avoided.