ADC P-80-412 - Manual

ADCP-80-412 N Issue 1 N April 2000
1074399 Rev A Page 1
^ 2000, ADC Telecommunications, Inc.
DSX Bay Tracer Illuminator
User Manual
13914-B
Content Page
INTRODUCTION .......................................................................... 1
Revision History ..................................................................... 2
Trademark Information ................................................................ 2
Admonishments ..................................................................... 2
Certification ........................................................................ 2
1 PRODUCT DESCRIPTION ............................................................... 2
2 SPECIFICATIONS..................................................................... 3
3 INSTALLATION ...................................................................... 3
4 OPERATIONAL CONSIDERATIONS ......................................................... 7
5 TROUBLESHOOTING .................................................................. 7
6 CUSTOMER INFORMATION AND ASSISTANCE ................................................. 8
INTRODUCTION
This guide describes the ADC DSX Bay Tracer Illuminator option used in large DSX-1 or
DSX-3 environments to enable technicians to locate far end LED tracer lamps more quickly.
The Bay Tracer Illuminator option consists of a stand-alone electronic sensor device that
mounts on the top of a DSX-1 or DSX-3 bay, and an inductive pick-up coil that mounts on
one or more –48 Vdc power input conductors feeding the bay fuse panel. Power to operate the
Bay Tracer Illuminator option is obtained from a branch of the same –48 Vdc central office
source that powers the components in the DSX-1 or DSX-3 bay.