ADC 70 - Manual (Page 23)

ADCP-80-524 • Issue 1 • November 2001
Page 23
© 2001, ADC Telecommunications, Inc.
Figure 16. Fuse Panel Mounting Brackets
Figure 17. Rear View of Typical Type 70 Fuse Panel Installation in Equipment Rack
USE 5/16-INCH (7.94 MM) 8-32
THREAD-FORMING FLAT-HEAD
SCREWS TO SECURE MOUNTING
BRACKETS TO PANEL
19-INCH RACK MOUNTING
BRACKET INSTALLATION
USE 3/8-INCH (9.53 MM) LONG
12-24 SCREWS AND #12 FLAT
WASHERS TO SECURE MOUNTING
BRACKETS TO RACK
16965-C
23-INCH RACK MOUNTING
BRACKET INSTALLATION
16386-B