Brother TD-2120N - Manual (Page 62)

ESC/P Command Reference
- 56 -
5. Control Command Details
ESC (C Specify page length
ASCII: ESC ( C nL nH mL mH
Decimal: 27 40 67 nL nH mL mH
Hexadecimal: 1B 28 43 nL nH mL mH
Parameters
nL=2, nH=0
0<（mL+mH*256）<8192(for 203dpi printers)
0<（mL+mH*256）<12000(for 300dpi printers)
Description
 Specifies the page length.
 The unit is 1 dot.
Page length=mL+mH*256
 The current paper position is the TOF.
 The top and bottom margins are canceled with ESC ( c.
 All previously entered text is cleared.
 A standard unit is not used.
 This command is available only with continuous length tape.
Inch, mm, and dot conversion table
inch mm
Number of dots
(203dpi)
Number of dots
(300dpi)
0 0.0 0 0
1 25.4 203 300
2 50.8 406 600
3 76.2 609 900
4 101.6 812 1200
5 127.0 1015 1500
6 152.4 1218 1800
7 177.8 1421 2100
8 203.2 1624 2400
9 228.6 1827 2700
10 254.0 2030 3000
11 279.4 2233 3300
12 304.8 2436 3600
13 330.2 2639 3900
14 355.6 2842 4200
15 381.0 3045 4500
16 406.4 3248 4800
17 431.8 3451 5100
18 457.2 3654 5400
19 482.6 3857 5700
20 508.0 4060 6000