Brother TD-2120N - Manual (Page 117)

ESC/P Command Reference
- 111 -
5. Control Command Details
ESC iXm2 Select default character code set
ASCII: ESC i X m 2 n1 n2 n3
Decimal: 27 105 88 109 50 n1 n2 n3
Hexadecimal: 1B 69 58 6D 32 n1 n2 n3
Parameters
n1: 01h (Fixed)
n2: 00h (Fixed)
00h≤n3≤04hDescription
 Selects the default character code set.
n3=00h: Standard character code set (*Manufacturer’s default)
n3=01h: Eastern European character code set
n3=02h: Western European character code set
n3=03h: Reserved
n3=04h: Japanese character code set
 This command is a static command.
Remarks
 Invalid if n3 is a value outside of the allowable range
ESC iXm1 Retrieve default character code set
ASCII: ESC i X m 1 n1 n2
Decimal: 27 105 88 109 49 n1 n2
Hexadecimal: 1B 69 58 6D 31 n1 n2
Parameters
n1: 00h (Fixed)
n2: 00h (Fixed)
Description
 The default character code set setting is returned as 3-byte data.
[1] 01h (Fixed)
[2] 00h (Fixed)
[3] Setting
00h: Standard character code set
01h: Eastern European character code set
02h: Western European character code set
03h: Reserved
04h: Japanese character code set
 The retrieved value is a value specified by a static command.