Brother TD-2120N - Manual (Page 104)

ESC/P Command Reference
- 98 -
5. Control Command Details
ESC i C Specify cutting
ASCII: ESC i C n
Decimal: 27 105 67 n
Hexadecimal: 1B 69 43 n
Parameters
n=0, 1 or 48, 49
Description
 Specifies cutting after printing.
n=1 or 49 (“1”): Specifies cutting.
n=0 or 48 (“0”): Cancels cutting.
 This command is applied to only a printer with auto cutter.
 The default auto cut setting can be changed with the P-touch Template Settings Tool
(P-touch Template Settings.exe).
 The number of auto cut copies can be specified with the P-touch Template Settings Tool
(P-touch Template Settings.exe).
 Manufacturer’s default auto cut setting: ON (auto cut)
Manufacturer’s default auto cut copies: 1