Brother TD-2120N - Manual (Page 102)

ESC/P Command Reference
- 96 -
5. Control Command Details
(1) Error information 1
Flag Mask Meaning
Bit 0 01h “No media” error
Bit 1 02h “End of media” error
Bit 2 04h “Cutter jam” error
Bit 3 08h Not used
Bit 4 10h Printer in use
Bit 5 20h Printer turned off
Bit 6 40h Not used
Bit 7 80h Not used
(2) Error information 2
Flag Mask Meaning
Bit 0 01h Not used
Bit 1 02h “Expansion buffer full” error
Bit 2 04h Communication error
Bit 3 08h Image error occurred
Bit 4 10h “Cover open” error
Bit 5 20h Not used
Bit 6 40h Leading edge detection error
Bit 7 80h System error
(3) Media type
Media Type Value Remarks
Continuous length tape 4Ah
Die-cut label 4Bh
(4) Status type
Status Type Value Remarks
Reply to status request 00h
(Not used) 01h
Error occurred 02h
(Not used) 03h - FFh
(5) Battery level information
Flag Mask Meaning
Bit 0 00h Full battery
Bit 1 01h Half battery
Bit 2 02h Low battery
Bit 3 03h Changing required
Bit 4 04h AC adapter in use