Brother TD-2120N - Manual (Page 34)

ESC/P Command Reference
- 28 -
5. Control Command Details
ESC P Apply pica pitch (10 cpi)
ASCII: ESC P
Decimal: 27 80
Hexadecimal: 1B 50
Parameters
None
Description
 Prints the subsequent text with the pica pitch (10 characters/inch).
 The character spacing is 20 dots (30 dots for 300dpi printers).
 If the character width is 20(or 30) dots or less, the character spacing is specified as 20(or 30) minus the
character width.
 If the character width exceeds 20(or 30) dots, the character spacing is specified as the character width.
(The spacing between characters is 0 dot.)
In this case, the pitch does not exactly equal the pica pitch.
 With double-width characters, the character spacing is doubled (40(or 60) dots).
 With half-width characters, the character spacing is halved (10(or 15) dots).
 When the character spacing is changed with ESC SP, the setting is updated.
 This command is invalid when proportional pitch is selected.
 In outline fonts, the spacing between characters is 0 dot.
Full Width Double Width Half Width
Setting (dots)
16 24 32 16 24 32 16 24 32
Gothic 16 24 32 32 48 64 8 12 16
Letter Gothic
Bold
8 10 14 16 20 28 4 5 7
Wid
th (dot
s)
Helsinki 16 21 28 30 42 56 8 11 14
The above table refers to characters with a fixed pitch. (Applying styles may increase the size.)
Example
For a 15-dot font at full width:
Ａ Ｂ
5 dots
15 dots
Ａ Ｂ
30 dots
10 dots
Full width Double width