Brother PJ-663 - Manual (Page 32)

10
About P-touch Template
Data can be sent from a host (such as measuring instruments, scales and bar code
readers) and printed in a template previously transferred to the machine from P-touch
Editor.
P-touch Template commands used in P-touch Template mode (except ESC i a) consist of
a prefix character and a two-character text string. When the prefix character is sent, the
machine begins the analysis of the P-touch Template command, and performs the
specified process if the following two-character text string corresponds to a command.
Static and dynamic commands
With static commands, items specified with a setting command are saved and stored in
the memory.
With dynamic commands, items specified with a setting command are temporarily saved
and applied until the machine is turned off.
If printing does not begin (main most frequent causes)
1) The command mode is not in the P-touch Template mode.
2) The conditions for the print start trigger are not met.
The following three types of print start triggers exists, but this selection is incorrect.
i) When the specified text string is received
ii) When all objects are filled
iii) When the specified number of characters is received
If the settings described above are incorrect, use the machine setting tool to specify the
settings.