Brother PJ-663 - Manual (Page 37)

15
^TS Specify template selection
[ASCII] ^ T S n1 n2 n3
[Decimal] 94 84 83 nd1 nd2 nd3
[Hexadecimal] 5E 54 53 nh1 nh2 nh3
[Parameters] n1:0 (Fixed)
0≤n2≤9
0≤n3≤9
[Description]
· Specifies the template selected from the machine as a number.
(n2*10)+n3:
Template number (1 to 99)
· The default selection number is 1.
· This command is a dynamic command.
[Remarks]
· The template numbers that can be set are between 1 and 99. This is invalid when an
attempt is made to specify a value other than these or when the number that is specified
is of a template not transferred to the machine.
[Example]
· To select template number 99:
Since n2=9 and n3=9, the command will be as follows.
^ T S 0 9 9 (5Eh 54h 53h 30h 39h 39h)