Brother PJ-663 - Manual (Page 12)

12
“At Printing” setting
(To cancel the “At Printing” setting for a date/time in P-touch Editor, display the properties
for the Date and Time object, and then clear the “At Printing” check box.)
· Horizontal alignment settings (“Justify” or “Equal Length”) specified in P-touch Editor are
changed to the left alignment setting.
· The setting for line spacing with a line return specified with the P-touch Editor can be set
between 0 and 255 dots.
(A negative line spacing setting cannot be used in P-touch Editor. In addition, since there is
an upper limit (about 21 mm) for the line width with the printer, a line spacing setting
larger than this limit specified in P-touch Editor will not be applied on the printer.)