Brother PJ-663 - Manual (Page 13)

13
Specifying the line spacing setting in P-touch Editor
・ Numbering settings specified in P-touch Editor are invalid.
(The text specified as the default numbering text is printed with P-touch Template.)
Default numbering
For the numbering text specified in P-touch Editor and shown above, “100” is the default;
therefore, “No. 100” will be printed when printing with the printer .
· Character styles specified in P-touch Editor are all made the same style within an object.
· If the “Long Text” setting is selected below “Text Layout” in P-touch Editor, the vertical
alignment setting is normally set for top alignment.
· If the “Fixed Frame Size (Wrap)” setting is selected under “Text Layout” in P-touch Editor,
the object size does not change, and the text size is reduced.
(“Fixed Frame Size (Wrap)” is a setting that was added for inserting long text. Since it is
possible that the text size may become extremely small if the wrapping feature is no
longer applied, we recommend that “Fixed Frame Size” be selected when paper with a