TOHO ELECTRONICS TRM-006A - Manual (Page 6)

6
2.2 Setting a data length
2.3 Setting a stop bit length
2.4 Setting a parity
2.5 Setting whether to conduct a BCC check
While in the "Set a communications parameter" screen on the preceding page, operate the ▲ and
▼ keys to make the settings. The initial value is
H H H H .
^ g f o
＊＊＊＊
F Stop bit 1
I Stop bit 2
c No parity
f Odd parity
D Even parity
N Data length, 7 bits
E Data length, 8 bits
c BCC check disabled
j
BCC check enabled
2.6 Setting a communications speed
While in the "Set a communications speed" screen on the preceding page, operate the ▲ and ▼
keys to make the settings. The initial value is
H H.
^ j T L
＊＊＊＊
I 1200 BPS
K
2400 BPS
E 4800 BPS
M 9600 BPS
F I 19200 BPS
2.7 Setting an address
While in the "Set a communications address" screen on the preceding page, operate the ▲ and ▼
keys to make the settings. The initial value is
H .
^ i d h
F Setting range: 1 to 99 stations (It cannot be set to a 0.)