Aastra Telecom 6739I - Manual (Page 13)

Model 6739i IP Phone Installation Guide 7
Installation and Setup
Installation and Setup
The 6739i can be setup to share a network connection with another network
device. Power can be provided by an AC adapter (optional accessory),
an 802.3af compliant network power source, or with a PoE inline power
injector (optional accessory). It can also be installed on a desk or mounted
on the wall. If your Network Administrator has already setup your
phone, please refer to the 6739i
User Guide for call handling information
or contact your Network Administrator.
Note: You can download the Aastra Model 6739i IP Phone User Guide from the
Aastra Web site at www.aastratelecom.com
Direct or Shared Network Connection
The phone can be set up as a direct network connection to the Ethernet wall
jack or as a shared network connection as a pass-through if connecting a
computer or another network device to the phone.
Direct Network Connection
Located at the top of the phone are two fully switched
10/100/1000 Mbps Ethernet cable ports. The port marked with
LAN is
used to connect the phone to the network, as well as provide power to
your phone (if required). See the section
"Connecting to the Network and
to Power" on page 9 for more information.
Ethernet Ethernet
Cable
Cable
Other Network Devices Other Network Devices
Separate Separate
Network
Network
Jack
Jack
Network Jack Network Jack
(if Inline power provided, (if Inline power provided,
do not install the power adapter)
do not install the power adapter)
To Network To Network
Power Power
Adapter
Adapter
Power Adapter Power Adapter
Connection
Connection