Sterlco GP Series 5-15 HP Portable Chillers - Manual (Page 42)

GP Series Portable Chillers Chapter 4: Operation 42 of 93
4-3 Status Screens
The controller has eight (8) preconfigured status screens. The main status screen (shown in
Figure Figure 16) shows the main operating points of the chiller: Entering and Leaving fluid
temperatures; Leaving fluid setpoint, pump discharge pressure, tank fluid level (depth), and
percentage of hot-gas bypass output.
Figure 16: Main Chiller Status Screen
Depressing cycles through the following screens (shown below) – Analog I/O, Digital
I/O, and Test. The Analog and Digital I/O screens provide status of all of the inputs and
outputs for the controller. The Test aides in troubleshooting the chiller when it is not
functioning properly by displaying the basic information that a service person will need to
know to determine the problem.