Sterlco GP Series 5-15 HP Portable Chillers - Manual (Page 38)

GP Series Portable Chillers Chapter 3: Installation 38 of 93
To set password protections:
1. Press the button to access the menu screen.
2. Press the or to highlight SETPOINTS, and press .
3. Press the or until the following screen appears for the Operator or Supervisor
Password
4. Press to accept the screen, and then press until the Operator or Supervisor
Password line is highlighted.
5. Press or to increment or decrement the number. The password can be between
0 and 9999.
6. Press to accept the Password and move to the next line.
7. For either Operator or Supervisor password the time that the password will allow the
controller to be active can be set by the Operator or Supervisor Password Time. With the
PW Time value highlighted, press or to increment or decrement the time. The
password time for either setup can be from 0 to 99 minutes.