ROTRONIC HF5 - Manual (Page 23)

E-M-HF5-V1_25
Rotronic AG
Bassersdorf, Switzerland
Document code Unit
HygroFlex HF5 Humidity Temperature
Transmitters: User Guide Instruction Manual
Document Type
Page 23 of 30
Document title
© 2009-2013; Rotronic AG E-M-HF5-V1_25
HF53 and HF55 transmitters:
Main Menu
Menu Items Selections / Information Notes
Device Settings
Units Metric / English
Back Light Key Press / On / Off Display backlight mode
Contrast LC display contrast adjustment
Trend On / Off Trend indication on the display
Device Information
Version Firmware version
Serial Nbr Serial number
Address RS-485 address
Type Device type
Name Device name User defined
Probe Information
Version Firmware version
Serial Nbr Serial number
Address RS-485 address
Name Device name User defined
SensorTest Humidity sensor status Off / Good / SQ-Tuned / Bad
Record On / Off
Data recording by the probe
(max. 2000 values)
Humidity Adjust
RefValue Humidity reference value ± 0.1 %RH steps
Acquired
Number of cal. points in probe
memory
Save cal. point to probe memory
Erases all calibration points
Effect depends on number of
calibration points
Temperature Adjust
RefValue Temperature reference value ± 0.1 ˚C steps
1-point adjustment only (offset)
o
Record: both the recording mode (start / stop and the log interval cannot be changed from the menu and
are as configured with the ROTRONIC HW4 software
o SensorTest: Off means that the humidity sensor has not been tested due to the configuration settings of
the test. For a description of the automatic humidity sensor test and drift compensation (SQ-tuning) see
documents E-T-AC3000-DF-V1 and E-M-HW4v3-F2-005