PATLITE BSV - Manual (Page 25)

- 25 -
9. Error Table
When an error has occurred, an alarm will sound. Refer to the following table for troubleshooting and its
solution.
- The type of alarm changes in conjunction with the type of error.
* The alarm sound is not audible if the volume is not at a nominal level.
* Even after the items below do not solve the problem, refer to the last page for assistance from your
PATLITE Sales Representative.
Error Sound Error Name Solution
Four short beeps
(Short Beep x4�
Hardware
Error
• The SD Card is not pushed all the way into the socket, or there is a loose
connection. Try re-inserting the SD Card.
• The contents on the SD Card is not readable. The SD card may be formated for
something other than FAT1�. Reformat the SD card for FAT1� and reload the
message data.
Three long beeps
(Beep x3�
MP3 Data
Related Error
• The playlist file on the SD card may be corrupted. Rewrite the data again, then
re-insert the card into the product.
• The MP3 data may not be in the data folder to be registered for the playlist file.
Confirm the MP3 data is on the SD card before re-inserting it.
• The MP3 data capacity may have exceeded the memory capacity of the product.
rewrite the data and verify the capacity does not exceed the specifications.
Three short bursts
(Short-burst beep x3�
Operating Mode
Data Error
• The operating mode configuration file may be written incorrectly. Verify the file
name before re-inserting it into the product.
10. Binary Input Table
CH1 CH2 CH3 CH4
No. 1 ●
No. 2 ●
No. 3 ● ●
No. 4 ●
No. 5 ● ●
No. � ● ●
No. 7 ● ● ●
No. 8 ●
No. 9 ● ●
No. 10 ● ●
No. 11 ● ● ●
No. 12 ● ●
No. 13 ● ● ●
No. 14 ● ● ●
No. 15 ● ● ● ●
The "●" mark indicates a COM to channel (CH) terminal contact.
Voice
Message
Terminal
CH