beautypg.com

Wiring – PATLITE BSV User Manual

Page 11

background image

- 11 -

6. Wiring

When wiring to external contacts for the signal line, use non-voltage contacts such as a relay, switch or an NPN

(PNP type also available� open collector circuit. Refer to table 1 below for contact capacity.
Refer to table 3 “Contact Capacity” on the following page.

• Wiring Example

• BSV-24N (NPN Transistor Type�

Power (+) White

Power (-) Black

CH1 Sky Blue

CH2 Yellow

CH3 Peach

CH4 Light Green

Fuse

Fuse

Power (+)

Power (-)

CH1

CH2

CH3

CH4

(COM)

(COM)

Do not short Power (+) to the CH lines. Failure do to so will result in damage to the product.

NPN Transistor Circuit

Non-voltage Contact Circuit

* The power (-) shares the same common as the signal ground.

• Double check the wiring to prevent mistakes. Failure to conform may result in product damage, resulting

in damage to the circuitry or fire.

WARNING

• Be sure the power is disconnected before wiring or installing this product. Possibility of electric shock,

short-circuiting or product failure may occur.

• Do not pull or tug at the wires with excessive force. Failure to comply will result in damage to the product.

CAUTION