NUUO CMS - Manual (Page 18)

NUUO Central Management System
Getting Started with the NCS System
Page - 18
4. To configure a third and a fourth monitor, repeat steps 1-3 naming the matrix instances as appropriate (for
example monitor3, monitor4), entering the port number (5230 for a third monitor and 5240 for a fourth), and
selecting the appropriate monitor.
5. Click OK to save all configuration of Matrix.
To execute a matrix in a multiple matrix system:
1. Ensure that the matrixes have been configured as described above.
2. In the Matrix Instance Dialog window, choose the matrix you want in the drop-down list, and then click Start to
start Matrix view.
3. Repeat steps 1 and 2 to execute each monitor.
1. When the device is a camera select Show Coverage Area to set the Range and Radian.
2. Click OK.
3. The device indicator will appear on the map. Drag it to the required location.
To drag a device indicator to a map from ServerView:
1. Ensure that the map you want is displayed.
2. Click on the ServerView window.
3. Directly drag a device to the desired location on the map.
If you are in MapView and click on a device which has already been added to a map, the map for that
device will be displayed.
To remove a device indicator from a map:
1. Right-click the indicator.
2. Click Delete.
7