NORD Drivesystems TI 275271019 User Manual
Technical information / datasheet, Sk cu4-eip, Notice

Technical Information / Datasheet
EtherNet/IP Bus module
SK CU4-EIP
1.1
LED - Anzeigen / LED displays, Derating
4913
Rck
TI 275900150
GB
version
reason for change(s)
issue
name
document
speech
Pos : 4 /T ec hnis che Inf or mationen/ SK xU x - Bus - Er wei ter ung en/ Et herNet /I P/SK CU 4-EIP / 275271019 / Basisi nf ormati onen [ SK CU4- EI P] @ 4\ mod_1384951329490_388. doc x @ 105631 @ 555 @ 1
SK CU4-EIP
Part number: 275 271 019
EtherNet/IP® - Internal bus – interface
NOTICE
Validity of the documents
This document is only valid in combination with the operating instructions for the relevant frequency inverter. All
of the information that is relevant for a safe start-up of this module and the frequency inverter is only available
under these conditions.
Scope of supply
1 x
Module
SK CU4-EIP
1 x
System bus cable set
grey / black
1 x
24 VDC cable set
brown / blue
2 x
Connecting screws
M4 x 20, cross-head
Field of use
Internal interface for connecting decentralised frequency inverter (SK 180E … SK 2xxE) to a
EtherNet/IP field bus. It is connected to the inverter via the system bus and can respond directly with
up to 4 frequency inverter. 2 digital inputs are available.
Technical data
Module
Temperature range
-25°C … xx °C *
Vibration resistance
3M7
Temperature class
Class 3k3
Firmware version
V1.2 R0
Protection class
IP20
Hardware version
AA
Supply voltage
24 V ± 20
%, ≈ 100 mA
Reverse polarity
protected
* The upper temperature limit depends on the frequency inverter and the operating mode
à see "Derating"
Digital input - working range
Low: 0 V … 5 V, High: 15 V … 30 V
Digital input - specific data
R
i
= 10 kΩ, input capacity: 10nF, reaction time 1 ms, inputs
according to EN 61131-2 type 1