Milestone Event Proxy - Manual (Page 15)

Event Proxy User Guide
www.milestonesys.com Page 15 Configuration
The Receive input events on group box on the Communication tab.
To configure how the event proxy should receive input events from a third party application, do the
following:
1. From the Communication tab, select the TCP or UDP option button depending on it is a TCP
or UDP-based event.
2. Enter the port number for the communication in the Port text box.
3. If the computer has more than one network adapter and a specific one must be used, enter
the host name or IP address in the Host text box. If not you can leave the text box empty.
Sending Output Events
You are able to configure how output events should be sent to the XProtect surveillance system in
the Communication tab’s Send output events on group box.
The Send output events on group box on the Communication tab.
To configure how the event proxy should send output events to XProtect, do the following:
1. From the Communication tab, select the TCP or UDP option button depending on it is a TCP
or UDP-based event.
2. Enter the port number for the communication in the Port text box.
3. Enter the host name or IP address in the Host text box.
Logs
You are able to configure how much information you would like to log in the Communication tab’s
Logging group box.