Milestone XProtect Professional 2014 - Manual (Page 125)

Milestone XProtect ® Professional
2014
Administrator's Manual
www.milestonesys.com 125 Advanced configuration
Name Description
Send SMS if this event occurs
Select if the system should automatically send an SMS when the
event occurs. You define the recipients of the SMS notifications as
part of the SMS notification configuration. When you use SMS
notifications, remember that you may have set individual camera
scheduling.
The setting is only available if you have enabled SMS notifications.
Delete Delete a selected event.
Add
Add a new event. When the Generic Events node is selected,
clicking Add will add a new generic event. When a specific generic
event is selected, clicking Add will add a timer event (on page 113)
to the selected generic event.
Output control on event (Events and Output-specific properties)
When you add output controls on events (see "Configure hardware output on event" on page 113),
specify the following properties:
Name Description
Event Select the required event.
Output
Select the required output event.
Scheduling and archiving
About scheduling
The scheduling feature lets you specify:

When you want to archive

That some cameras transfer video to your system at all times

That some cameras transfer video only within specific periods of time or when specific events
occur

When you want to receive notifications from the system
You can set up general scheduling properties for all your cameras or individual properties per camera.
You can set up when:

One or more cameras should be online and transfer video to your system.

One of more cameras should use speedup and use a higher than normal frame rate.