AT&T E5913B - Manual (Page 21)

18
Telephone operation
Handset settings
Using the feature menu, you can change settings
to customize how the telephone works.
1. Press
MENU/
SELECT
in idle mode to enter the
feature menu.
2. Use the up or down NavKey or to scroll
to the feature to be changed. When scrolling
through the menu, the top menu item is always
highlighted with a
> symbol.
3. Press
MENU
/SELECT to select the highlighted
item.
NOTE: Press OFF/CLEAR to cancel an operation, back up
to the previous menu, or exit the menu display. Press and
hold OFF/CLEAR to return to the idle mode.
Ringer volume
Using this menu, you can set a ring volume level
(1-6), or turn the ringer off (0). When the ringer
is turned off, the
will appear on the handset
screen.
To adjust the
RINGER VOLUME:
1. Press MENU/
SELECT
in idle mode to enter the
feature menu.
2. Use the up or down NavKey or to
scroll to the RINGER TONE menu, press
MENU
/SELECT to enter the menu when it is
highlighted with a > symbol.
3. Press the left or right NavKey or to sample
each volume level.
4. Press
MENU
/SELECT to save your preference.
-OR-
When the handset is in idle mode, press the
VOLUME
buttons on the right side of the handset
to change ringer volume.
NOTE: The ringer volume level also determines the ringer
levels of intercom calls (pages 16-17) and the paging
tone when initiating the handset locator feature (page
12). If the handset ringer volume level is set to off (0),
that handset is silenced for all incoming calls and paging.
RINGER VOLUME
>
DIRECTORY
CALL LOG
>
RINGER VOLUME
RINGER TONE