AT&T E5913B - Manual (Page 16)

13
Telephone operation
Options while on calls
Volume control
Press the
VOLUME keys on the side of the handset
to adjust listening volume. Each press of the button
increases or decreases the volume.
When you change the volume level, the new setting
is saved.
NOTES:
1. All volume settings, (normal handset, speakerphone, and
headset) are independent.
2. When you try to increase the maximum volume or decrease
the minimum volume, you will hear two beeps.
Call waiting
If you subscribe to call waiting service with your
local telephone service provider, you will hear a
beep if someone calls while you are already on
a call. Press
PHONE/
FLASH to put your current
call on hold and take the new call. You can press
PHONE/
FLASH at any time to switch back and
forth between calls.
Multiple handset use
During a call, a person on another handset can
press
PHONE/
FLASH or SPEAKER to join the
conversation.
A person at either handset can press
OFF
/CLEAR,
or place the handset in the telephone base or
charger to exit the call, but the call will not be
terminated until all handsets hang up.
NOTE: A maximum of two handsets can be used on an
outside call, and the other two handsets can be used on
an intercom call.
TONE
DELETE PAUSE
MUTE REDIAL
Press to
switch
calls.
Press to
adjust the
listening
volume