AT&T E5913B - Manual (Page 12)

9
Getting started
3. To attach the bracket for wall mounting, insert
the tabs of the bracket into slots and
on the telephone base, then press the other
bracket tabs into slots and as shown on
the right.
4. Plug the power adapter into an electrical out-
let not controlled by a wall switch. Plug the
telephone line cord into a telephone wall jack.
To mount the telephone on the wall, position
the mounting holes
and over the tel-
ephone outlet mounting studs. Press and slide
the bracket down firmly so the telephone is
held securely on the telephone outlet mount-
ing studs.
Telephone outlet mounting studs
Installation options
Tabletop mounting
To change back from the wall mounting to tabletop mounting, follow the
directions below.
1. Remove the telephone base from the wall.
Unplug the cords from the wall jacks. Remove
the bracket from the telephone base.
2. Insert the bracket tabs into slots
and on the telephone base, then
press the other bracket tabs into
slots and .
3. Route cords through slots. Plug the other end
of the telephone line cord into a telephone
wall jack. Plug the large end of the larger
power adapter into an electrical outlet not
controlled by a wall switch.