Dwyer HM35 - Manual (Page 6)

3.2 Lighting
Switching on
Press the
On/Off
-key
( )
for > 1 s
Brightness control
In the Menu, select the Configuration → Lighting function and
select an adjustment of Off, Level 1, Level 2 or Level 3.
Switching off
Briefly press the On/Off key
( )
(< 1 s)
(switch off the instrument),
or automatic switch-off after 20 s.
With mains operation, the HM35 must be switched off manually.
3.3 Pneumatic
connection
Designation Pressure range
Hose 4/6 mm ≤ 7,5 bar
NPT1/8“ internal 10 ... 90 bar
Plug in nipple „Rectus“ Type 20 ≤ 30 bar
M10 x 1 internal thread (for „Minimess“ connector) all
Ensure that the pneumatic hoses are connected correctly!
+P Higher pressure
S-
Lower pressure (not available with the absolute and relative pressure version)
When screwing onto a coupling, it is important to hold the
coupling steady with a wrench to prevent any turning!
Never secure by holding the casing itself!
5