Crystal T-1-CPF Hydraulic Comparator - Manual (Page 6)

Overview  4
Type T Pump Operation Manual
Parts Included with Pump Systems for Crystal Reference Indicators
System F
FOV and FWV
(T-1-CPF) Part Number Description
5255 CPF Male to 15/16-20 Male Adapter „ (2 )
MPF15K-1/4FPT CPF Female to 1/4" NPT Female Fitting „
MPF-1/4BSPF CPF to 1/4" BSP Female Fitting „
MPF-1/8MPT * 1/8" MPT Fitting (for 30 Series Calibrator) „ (2 )
60R120 1/4" Bonded Seals „ ( 5 )
1351 * Test Leads; Red & Black, including clips „
5249 Protective Vinyl Cap „ ( 4 )
60I104 Pack Tape (1 roll) „
124004 Shoulder Strap „
124304 Aluminum Carrying Case „
* The MPF-1/8MPT fittings and 1351 Test Leads are included only with Pump Systems for the 30 Series Calibrator.
Ordering a Pump System
Any Type T Series Pump System may be ordered with or without a reference indicator. The table below provides an explanation of the Pump System ordering
scheme when ordering a system without an indicator. For details on ordering the Pump Systems with an indicator, see the indicator datasheet.
Reference Indicator Reference Indicator Included Pump System Liquid
nVision . . . . NV No . . . -NONE System F (T-1-CPF) . . . -FOV Drained . . . -E
30 Series . . . IS30 System F (T-1-CPF) . . . -FWV
XP2i . . . . . . . XP2i
m1 . . . . . . . . . M1
X SAMPLE PART NUMBERS
NV-NONE-FOV-E . . . . . . . System F pump system (for nVision) drained of fluid, for use with oil.
IS30-NONE-FWV-E . . . . System F pump system (for 30 Series) drained of fluid, for use with water.
15KPSIXP2i-FWV-E . . . System F pump system, drained, for use with water, with a 15 000 psi XP2i gauge included.
Hydraulic Fluid
Type T Series Pump Systems are only available delivered empty. You will still need to specify what fluid
type you are going to use (for example; FOV for Oil or FWV for Water).