Crystal nVision Lab Reference - Manual (Page 42)

Safety and Certifications  40
nVision Operation Manual
ATEX EC Declaration of Conformity
Note: These approvals apply only to the nVision Reference Recorder.
DECLARATION OF CONFORMITY
In accordance with the ATEX Directive 94/9/EC
Manufacturer’s Name: Crystal Engineering Corporation
An AMETEK Inc. company
Manufacturer’s Address: 708 Fiero Lane, Suite 9
San Luis Obispo, CA 93401
USA
Declares under sole responsibility that the product as originally delivered
Product Name: Reference Recorder
Model Number: nVision Series
Product Options:
Complies with the essential requirements of the following applicable European Directives, and carries the CE marking
accordingly:
ATEX Directive 94/9/EC
And conforms with the following product standards:
Marking II 1G Ex ia IIB T4 Ga, Ta = -20C to 50C, Rayovac Max Plus 815
II 1G Ex ia IIB T4 Ga, Ta = -20C to 45C, Duracell MN1500
II 1G Ex ia IIB T3 Ga, Ta = -20C to 50C, Energizer E91, EN91
II 1G Ex ia IIB T3 Ga, Ta = -20C to 50C, Duracell MN1500
Standard EHSR
EN 60079-0: 2006 The EN 60079-0:2009 harmonized standard has been compared to the standard used for
certification purposes and no changes in the “state of the art” apply to the equipment.
EN 60079-11: 2007 The EN 60079-11:2012 harmonized standard has been compared to the standard used for
certification purposes and no changes in the “state of the art” apply to the equipment.
EN 60079-26: 2007 Harmonized
IEC 60079-0: 2007 Harmonized (used for guidance in respect of marking)
EC-Type Examination Certificate Sira 09 ATEX 2008 X
Sira Certification Service, Notified Body 0518
Rake Lane, Eccleston, Chester, CH4 9JN
England
I hereby declare that the equipment named above has been designed to comply with the relevant sections of the above referenced
specifications. The unit complies with all essential requirements of the Directives
USA Signatory: European Signatory:
______________________________
Division Vice President & Crystal Business Manager
David K Porter, P.E.
Crystal Engineering Corporation, an AMETEK Inc. company
708 Fiero Lane, S u ite 9, San Luis Obispo, CA 93401, USA
+1 805 595 5477
AMETEK Denmark A/S
Gydevang 32-34, 3450 Allerød, Denmark
+45 4816 8000
4 April 2013
DECLARATION OF CONFORMITY
According to ISO/IEC 17050-1:2004
Manufacturer’s Name: Crystal Engineering Corporation
An AMETEK Inc. company
Manufacturer’s Address: 708 Fiero Lane, Suite 9
San Luis Obispo, CA 93401
USA
Declares under sole responsibility that the product as originally delivered
Product Name: nVision Series Reference Recorder XP2i Series and XP2i-DD Series Digital Pressure Gauge
nVision Series Lab Reference 30 Series and IS90 Series Pressure Calibrator
CPF Series Fittings and Hoses M1 Series Pressure Gauge
Complies with the essential requirements of the following applicable European Directives, and carries the CE marking
accordingly:
Pressure Equipment Directive 97/23/EC
Have been designed and manufactured to the following
Product and Pressure Range Description CE
Mark
Pressure gauges, calibrators, and
recorders (pressure accessories
per guideline 1/6)
The above listed pressure gauges, calibrators and reference recorders are designed
and manufactured in accordance with applicable portions of Annex I, Essential Safety
Requirements, and sound engineering practices. These pressure gauges or calibrators
(classified as pressure accessories per guideline 1/6) have a volume (V) of less than
0.1 liter (Article 3, 1.1.(a) first indent, Group 1 fluids).
Maximum Allowable Pressure (PS)
≤ 200 bar (2 900 psig)
All pressure gauges, calibrators and reference recorders for use on gases or liquids
less than or equal to 200 bar (2 900 psig) are not subject to the essential requirements
of the directive 97/23/EC (PED, Annex I) will be classed as Sound Engineering Practice
(SEP), and shall not have the CE mark applied.
No
Maximum Allowable Pressure (PS)
> 200 bar (2 900 psig)
For pressure gauges, calibrators and reference recorders for use on gases or liquids
above 200 bar (2 900 psig) on Class 1 & 2 gases or liquids, Crystal Engineering
maintains a technical file in accordance with Annex III, Module A (internal production
control) when CE mark is required.
Note: CPF Hoses (MPH series) not for use with Group 1 fluids and gases
Yes
I hereby declare that the equipment named above has been designed to comply with the relevant sections of the above referenced
specifications. The unit complies with all essential requirements of the Directives.
USA Signatory: European Signatory:
______________________________
Division Vice President & Crystal Business Manager
David K Porter, P.E.
Crystal Engineering Corporation, an AMETEK Inc. company
708 Fiero Lane, Suite 9, San Luis Obispo, CA 93401, USA
+1 805 595 5477
AMETEK Denmark A/S
Gydevang 32-34, 3450 Allerød, Denmark
+45 4816 8000
4 April 2013
PED EC Declaration of Conformity
Note: These approvals apply to both the nVision Reference Recorder & Lab Reference.