Index removal from slope-face meter, Schlumberger brand names) 7, Index removal from slope-face meter 7 – Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities User Manual
Page 7
Installation Manual
ITRON/ACTARIS SLOPE-FACE MODELS 175/250/400 WITH DIAL OR
ODOMETER INDEX
(INCLUDING METERS WITH SPRAGUE AND SCHLUMBERGER BRAND NAMES)
Odometer style index
Dial index
Figure 1: Meter and dial or odometer index options
INDEX REMOVAL FROM SLOPE-FACE METER
1 Use a large screwdriver to puncture and remove the tamper plugs, if present
2 Use a large screwdriver to remove and discard the three (3) cover mounting screws and the cover
Figure 2: Remove cover mounting screws
3 Completely remove and discard the old gasket See
Use a putty knife to clean the meter surface of all gasket
remnants that might limit the effective ness of the new gasket
Figure 3: Completely remove gasket
Page 7
July 2014
This manual is related to the following products: