Audient ASP4816 - Compact Analogue Recording Console - Manual (Page 5)

Page -5- © Audient Ltd
Introduction.
Unpacking
Your Audient ASP4816 Console has been carefully and meticulously tested and inspected before dis-
patch.
Please check for any signs of transit damage. If any signs of mishandling are found please notify the
carrier and inform your dealer immediately. The packaging should include the console, an IEC power
cord and this manual.
IMPORTANT SAFETY INSTRUCTIONS
Please read all of these instructions and save them for later reference before connecting ASP4816 to
the mains and powering up the console. To prevent electrical shock and fire hazard follow all warnings
and instructions marked on the ASP4816.
This unit is connected via its IEC power cord to the mains safety earth.
NEVER OPERATE THIS CONSOLE WITH THIS EARTH CONNECTION REMOVED.
Internal Switch Mode Power Supply & Mains Fuse
ASP4816 utilises an internal switch-mode power supply that is very quiet and passively cooled with
plenty of current capability and headroom. This switch-mode design will accept any A.C line voltage
from 90V to 264V. Please ensure your A.C mains line voltage is within this specification. Consult a
qualified technician if you suspect difficulties.
DO NOT ATTEMPT TO TAMPER WITH THE POWER SUPPLY OR MAINS VOLTAGES
- HAZARDOUS TO HEALTH.
Always replace the mains fuse with the correct value - T2A slow blow.