Audient ASP4816 - Compact Analogue Recording Console - Manual (Page 25)

Page -25- © Audient Ltd
Console functions.
1 This is the LONG FADER
which controls the level of the
LF signal.
2 This is the +10dB mark. The
fader is fully open at this point
and introducing 10dB of gain
into the signal path.
LONG FADER (LF)
Located close to the operator this
fader operates on the LF signal
path and is therefore mainly used
for creating the monitor mix and
the final stereo mix for the title.
The fader is expected to operate
around the 0dB mark with 10dB
of gain in hand allowing the signal
to be increased or decreased in
level.
When level setting start with the
fader in this position then adjust
the input sensitivity control for the
correct level to optimise the gain
structure.
3 This is the 0dB mark. This is
the normal operation position
for the fader.
4 With the fader here the signal
path is closed and no signal
will pass.
CHANNEL STRIP