Audient ASP4816 - Compact Analogue Recording Console - Manual (Page 36)

Page -36- © Audient Ltd
MASTER FADER
The master fader is used to control
the stereo output of the console.
Unlike the channel faders it is
calibrated with the 0dB mark at
the top as the main purpose of this
fader is to create a fade out at the
end of a title.
Under normal operating conditions
the fader should always be set at
maximum. If it has to be pulled
back a significant distance it
indicates that the levels to the mix
bus are too high and should be
reduced.
1 The MASTER FADER
controls the level of the stereo
output signal.
2 This is the 0db mark. The fader
is fully open at this point.
3 With the fader here the signal
path is closed and no signal
will pass.
Console functions.
MASTERS