Al-125-1 installation instructions 2, Hinge adjustment – Aleco AL-125-1 User Manual
Page 2
STEP
1
Place door in closed position
and wedge door up it is plumb.
Insert tension rod into the tension
adjustment hole as shown and
rotate in direction of arrow. Once
desired tension is set, insert tension
pin. Only one (1) hole of tension is
recommended for bottom hinges.
STEP
2
Increase tension on top hinge(s) if
door panel sags or return action is
too slow.
NOTE: DO NOT exceed five (5) holes
of tension.
2
FOR ANY QUESTIONS OR COMMENTS, PLEASE CONTACT AN ALECO REPRESENTATIVE
2720 E. Avalon Ave. Muscle Shoals AL, 35661 Phone (256) 248-2402 or toll free 1-800-633-3120
Fax: 1-800-750-9616 email: [email protected] web: www.aleco.com
HINGE ADJUSTMENT