Aleco Steel-Lite - Manual (Page 3)

Step
2
Door Installation
See
Step
3
Adjustments
On Next Page
2.1 Loosely attach bottom bearing to jamb
using one 3/8” bolt only.
2.2 Slide shaft into bottom bearing,
positioning door on wood spacer.
2.3 Swing door up, insert top cam bolts
and snug up (hand tight).
2.4 Insert second bolt in bottom bearing
(hand tight).
2.5 Remove wood spacer. Close door to
seat cam follower and level cam on bolts.
Tighten all four bolts using 9/16” socket.
Cam
Installed
Attach Bottom Bearing to
Jamb and Slide Shaft into
Bearing
Swing Door
Up and Attach
Cam Bolts
Wood Spacer