West Control Solutions KS 800 Operating Instructions - Manual (Page 10)

Multi-Temperature-Controller KS 800
For units with analog outputs,
2 x 8-pole terminal, order no. 231-308/026-000, resp. 9463 000 05321 is required additional-
ly.
4.2 Bus-Stecker
For connecting KS 800 to the fieldbus system, the connectors listed in the table must be used:
Profibus Canbus; RS422/485 DeviceNet
z.B. Siemens * )
6ES7 972-0BA10-0XA0
6ES7 972-0BA10-0BB0
6ES7 972-0BA10-0BA0
6GK1 500-0EA00
Sub-D-connector/socket; prefer com-
mercially available metal/metalized
versions Special adaptor
PMA order no.
9407 799 00301
* )These connectors are not available from PMA.
Specification of the order number is not binding, as these numbers can always be changed by
Siemens.
Note! For pin allocation see chapters 8.2.1 und 8.2.2
10 9499 040 49111