West Control Solutions N8080 (for 2xxx) - Manual (Page 4)

1 OPERATION MODE
This mode covers day-to-day operation of the Indicator.
1.1 FRONT PANEL
1-1 Volume I OM091-1
59136
Key/Display/Indicator Function
Down key (Ú) In Edit Mode, decrements the flashing digit in the Primary Display.
Scroll key (Ø) Puts Indicator into Edit Mode; in Edit Mode, selects digit to be altered
(selected digit is flashing) in Primary Display. Wrap-around occurs from
right-most digit to left-most digit.
Program Key (PGM) Selects parameter to be viewed/edited. In Edit Mode, confirms changed
parameter value.
Reset key (RST) If the process variable is displayed, resets the latched Alarm 1. If the
Maximum (High) Value, Minimum (Low) Value or Alarm 1 Elapsed Time is
displayed, resets the displayed parameter.
Down (Ú) and Scroll
(Ø) keys
If pressed simultaneously in Edit Mode, will abort the Edit operation and
will restore the parameter to its initial value.
Primary Display Normally displays the process variable value. Displays other Operation
Mode parameters when the Program (PGM) key is used. If the Help
Facility is enabled (see Subsection 2.4), this display shows the parameter
description for three seconds before displaying the parameter value.
Secondary Display Shows a single-character identifier for the parameter value being
displayed (blank for process variable).
OP1
indicator ON when Alarm 1 is active.
OP2
indicator ON when Alarm 2 is active.