West Control Solutions N8080 (for 2xxx) - Manual (Page 34)

4-2 Volume II PM091-4
59136
Identifier Hex. Parameter Adjustment Range
l 6C Output 1 Use 0 Alarm 1 non-latching,
direct action
1 Alarm 1 non-latching,
reverse action
2 Alarm 1 latching, direct action
3 Alarm 1 latching, reverse
action
4 Logical OR Alarm 1 & 2,
direct action
5 Logical OR Alarm 1 & 2,
reverse action
m 6D Output 2 Use 0 Alarm 2, direct action
1 Alarm 2, reverse action
2 Logical OR Alarm 1 & 2,
direct action
3 Logical OR Alarm 1 & 2,
reverse action
n 6E Select Re-transmission
(Linear) Output Range
0 None
1 0 - 5V
2 1 - 5V
3 0 - 10V
4 2 - 10V
5 0 - 20mA
6 4 - 20mA
o 70 Total Scale Factor 0 Seconds
1 Minutes
2 Hours
NOTE: All Configuration Mode parameters are Read Only when
the instrument is not in Configuration Mode, Read/Write
when the instrument is in Configuration Mode.
Table 4-1 Parameter Identifiers and Adjustment Ranges - Configuration Mode