Thermo Fisher Scientific CyberScan DO 1500 - Manual (Page 7)

Instruction Manual CyberScan DO 1500
4
press to select options setup
to standardize
press to store/recall data
press
save/view
std
% Sat
ATC
°C
STABLE
Measure
3.2. Display/ Keys
Overview of the meter screen display and function key layout.
Press std key to initiate
standardisation from measure
mode. Or press std key at the
‘Standardize’ mode to exit to
Measurement mode without
confirming the calibration OR
to exit from Setup mode.
Press mode to select
operation mode to be mg/L or
%sat.
Press setup key to access
setup for configuration of meter
settings.
Press print/ enter key to print/
confirm selection or change
being made.
Press save/ or view/ to
adjust setup option values OR
save the data into memory and
view those data.
Press stdby key to start up or
put the meter in standby mode.
Meter Display: CyberScan DO 1500