Thermo Fisher Scientific CyberScan DO 1500 - Manual (Page 34)

Instruction Manual CyberScan DO 1500
31
4.1.12. P12.0: Clear Stored Data
This setup option allows you to clear all stored data sets (from
previous measurements) in the meter’s memory for new data to be
stored. Note old data sets will be overwritten by any new data sets in
the event when the stored locations have exceeded.
press to set value
press to accept enter
Print
press to set value
press to accept enter
clear
To Clear Stored Data
1. Access the Setup pages menu from the measurement mode by
pressing the setup key.
2. Press
the or key in setup mode to access the Clear Stored
Data setup page. Press enter to access the setup page.