Thermo Fisher Scientific CyberComm Pro for CyberScan pH 1500 - Manual (Page 5)

Instruction Manual CyberScan pH 1500
2
2 INSTALLATION OF CYBERCOMM DATA ACQUISITION SOFTWARE (DAS)
2.1 Loading of CD-ROM
See Figure 1.
Before running the program, check that the pH 1500 meter is properly connected to the computer. It is
preferable to connect to either one of the COM (serial) ports available on a computer. Note the number of the
COM port that you have connected to the meter as this will be required in setting up the CyberComm DAS
later.
a) Turn on the computer (PC).
b) Insert the CD-ROM provided into a CD-ROM drive of your PC.
c) To install the DAS, use the My Computer to view the file contents in your CD_ROM drive. Locate and
click onto the SETUP file under the CyberComm directory. Double-click again on this file and the
program automatically starts installation. Alternatively you can use the Add/Remove Programs feature in
Control Panel to install the CyberComm and follow the instruction accordingly. If in doubt, please refer to
your Microsoft Operating Manual for further details.
Figure 1: CyberComm Pro Installation/ Welcome Screen