Thermo Fisher Scientific CyberComm Pro for CyberScan pH 1500 - Manual (Page 16)

Instruction Manual CyberScan pH 1500
13
4.2.8 Store and Recall
a) Store Memory
The two large icons enable you to store the reading during any point during the measurement. You may want
to store one reading at different times, under different mode. (E.g.: a pH reading then subsequently a mV or
REL mV reading)
b) Recall
Memory
See Figure 17.
The ‘recall memory’ icon then enables you to see the readings that you stored in a pop up box.
Figure 17: Recall Memory/ Recorded Readings and Information
4.3 To quit CyberComm Program
See Figure 18.
Choose Exit from drop down menu of File or Click the ‘X’ button on the top right hand corner of the window.
A pop-up menu will prompt you to save settings; select Yes if you want the settings you set to be available
for next usage.
Figure 18: CyberComm Pro/ Exit Screen with options to save settings