Thermo Fisher Scientific CyberScan pH 11/pH 110 - Manual (Page 41)

Instruction Manual CyberScan pH 11 / 110
37
9.2.4 P1.4 Select °C or °F Temperature Units
Available in pH 110 meter only
The pH 110 meter lets you select between °C and °F
units for temperature readings.
From measurement mode
1. Press SETUP key to enter Set Up mode.
2. Press the MI/▲ or MR/▼ keys to scroll through
subgroups until you view parameter P1.0.
3. Press the HOLD/ENTER key four times to
select parameter 1.4.
4. Press the MI/▲ or MR/▼ keys to toggle
between °C and °F.
5. Press the HOLD/ENTER key to confirm
selection and to return to the subgroup
menu. Press the CAL/MEAS key to return to
measurement mode.
See Figure 33.
°F
°C
SETUP
f
p 1.4
SETUP
C
p 1.4
MR MI
Figure 33: P1.4 - Select
temperature units, °C or °F